Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located just below the front windscreen on the passenger side: remove the retaining clips of the plastic cover under the windscreen; open the front bonnet, remove the seal along the plastic edge to detach the cover and access the cabin air filter housing.

At this point, remove the plastic grille in front of the filter housing and extract the old filter.

Before inserting the new one, ensure that the retaining clips of the filter support are intact; if not, replace them. Insert the new filter, then refit the grille, cover, and seal.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
How to Replace the Cabin Air Filter on a Jeep Grand Cherokee 4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If you own a Jeep Grand Cherokee Mk4 and want to learn how to correctly replace the cabin air filter, follow the procedure below. First, reach the pa…
How to Replace the Cabin Air Filter on the Jeep Grand Cherokee
How to Replace the Cabin Air Filter on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this guide, you will learn how to remove and replace the cabin air filter on the Jeep Grand Cherokee in simple steps. First, open the front passen…
How to Replace the Cabin Air Filter on Jeep Grand Cherokee MK4
How to Replace the Cabin Air Filter on Jeep Grand Cherokee MK4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this short video, see how to dismantle and replace the cabin air filter on the fourth series Jeep Grand Cherokee in simple steps. First, get insid…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos