Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Grille on Jeep Wrangler 2018

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Grille

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the front grille on a 2018 Jeep Wrangler by following these simple steps. First, open the bonnet of your vehicle by releasing the side latches, and remove the plastic clips found on the sides of the grille using a very thin lever; then gently pull the grille forward to remove it, as shown in the video.

At this point, proceed with reassembling the grille by applying the reverse procedure!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Grille of a Jeep Wrangler JK
How to Remove the Grille of a Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) Removing the grille of a Jeep Wrangler, model JK, is very simple. Simply open the front bonnet and remove the fixing screws using a flathead screwdri…
Removal and Replacement of the Front Grille
Removal and Replacement of the Front Grille
Jeep Wrangler (2007-2018 / JK, MK 3) First, open the engine bay bonnet. Locate the position of the six clips that hold the grille in place within its housing. Using a screwdriver, remove…
How to Replace the Front Headlamp Bulb of a Jeep Wrangler
How to Replace the Front Headlamp Bulb of a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front headlamp bulb of a Jeep Wrangler, first open the bonnet to access the bolts at the top of the front grille. Once released, you c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos