Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Front Grille

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Grille

See other generations:
Video tutorial

First, open the engine bay bonnet. Locate the position of the six clips that hold the grille in place within its housing.

Using a screwdriver, remove them carefully to avoid scratching the grille. Once done, pull the top of the grille towards you, rotating it around the lower base.

Now you can replace, for example, the headlamp bulb by turning its connector 90° clockwise and refitting it by following the reverse procedure. This maintenance operation was performed on a Jeep Wrangler.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Grille of a Jeep Wrangler?
How to Remove the Front Grille of a Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) To remove the front grille of a Jeep Wrangler, follow these steps. Start by opening the bonnet and locating the upper fastening screws of the grille.…
How to Replace the Front Headlamp of the Jeep Wrangler?
How to Replace the Front Headlamp of the Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front headlamp of the Jeep Wrangler, open the bonnet to access the rivets securing the upper part of the front grille. By removing the…
Rear Headlamp Bulb Replacement
Rear Headlamp Bulb Replacement
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the rear headlamp bulb, you need to remove the headlamp itself by unscrewing the screws located at the four corners (the protective grille…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos