Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Headlamp Bulb Replacement

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Tail light bulb

To replace the rear headlamp bulb, you need to remove the headlamp itself by unscrewing the screws located at the four corners (the protective grille comes off with the headlamp). Once the headlamp is free from its housing, disengage the bulb holder by turning it anti-clockwise and proceed with replacing the bulb (bayonet fitting). Reattach the bulb holder and reverse the process to reinstall the rear headlamp and the protective grille: align the headlamp in its housing, apply the grille, and tighten the four securing screws.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
Replace the Rear Headlamp Bulbs on a Jeep Wrangler
Replace the Rear Headlamp Bulbs on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial, you will learn how to remove and replace the rear headlamp bulbs on a Jeep Wrangler in simple, quick steps. First, move to the rear…
How to Change the Headlamp Bulb on a Jeep Wrangler
How to Change the Headlamp Bulb on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) This brief tutorial shows you all the steps required to change the headlamp bulb on a third-generation Jeep Wrangler, produced from 2007 to 2018. Sta…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos