Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time in a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Clock

See other generations:
This video is currently unavailable

In this tutorial, you will learn how to set the time in a Jeep Wrangler, a very simple and quick operation to perform after replacing the battery or switching to daylight saving time. First, enter the cabin, then turn on the instrument panel and, with the radio off, press the "SETUP" button on it. Once done, enter the "Set clock" section using the right control knob, set the time as needed, and save the setting by pressing the knob button.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…
How to reset the TPMS light on the Jeep Wrangler
How to reset the TPMS light on the Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) When the tire pressure warning light comes on in a Jeep Wrangler, it is necessary to adjust the pressure following the instructions given by the manu…
How to Set the Time on a 2012 Jeep Wrangler
How to Set the Time on a 2012 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) If you own a Jeep Wrangler Mk3 (2012) and want to learn how to manually adjust the system time displayed, carefully follow this guide. First, turn on…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos