Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

If you need to replace the battery on this type of vehicle, you will find the necessary information and various steps to carry out the replacement safely. First, open the bonnet and locate the battery on the right side.

Next, disconnect the negative terminal first, followed by the positive terminal. Then, use a socket spanner to unscrew the fixing bolt on the lower plate.

This will free the battery, allowing you to extract it from the compartment and replace it with the new one. Reconnect the positive terminal first, then the negative terminal, and re-tighten the fixing bolt of the lower plate.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the Jeep Wrangler?
How to Replace the Battery in the Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) As shown in this tutorial, replacing the battery in the Jeep Wrangler TJ is a very simple and quick operation. After ensuring that the key is not in …
How to Replace Engine Oil
How to Replace Engine Oil
Jeep Wrangler Change engine oil in the Jeep Wrangler. …
How to Replace the Battery in My Jeep Wrangler
How to Replace the Battery in My Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief video, you can see the steps to remove and replace the battery located in the engine bay of the third generation Jeep Wrangler. First, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos