Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in My Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Battery

In this brief video, you can see the steps to remove and replace the battery located in the engine bay of the third generation Jeep Wrangler. First, open the bonnet and start by removing the plastic cover of the battery, which is found on the left side. Then disconnect both battery terminals (positive and negative) using a 10 mm socket, as shown in the video. Next, unscrew the battery bracket screw located at the bottom using the same socket; lift and replace the battery with the new one!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) In today's video, we will see the procedure necessary to remove and replace the battery in the Jeep Wrangler in simple and quick steps. First, open t…
Jeep Wrangler (1997-2007 / MK 2, TJ) As shown in this tutorial, replacing the battery in the Jeep Wrangler TJ is a very simple and quick operation. After ensuring that the key is not in …

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos