Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

If you need to replace the battery on this model of vehicle, the following description provides the procedure and steps to work safely. Once you open the bonnet, you will find the battery located on the right side.

First, disconnect the negative terminal, followed by the positive terminal. Then, use a spanner to unscrew the nuts securing the upper crossmember.

Remove the old battery and replace it with the new one, then reconnect the positive terminal first, followed by the negative terminal, and finally re-tighten the nuts securing the plate.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Change the Key Fob Battery on a Jeep Wrangler
How to Change the Key Fob Battery on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the battery in the key fob of a Jeep Wrangler, take the fob and locate the small slot along the edge of the casing. Insert a flat screwdri…
How to Replace the Battery in My Jeep Wrangler
How to Replace the Battery in My Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief video, you can see the steps to remove and replace the battery located in the engine bay of the third generation Jeep Wrangler. First, …
How to Replace the Remote Battery on a Jeep Wrangler
How to Replace the Remote Battery on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Replacing the remote battery on a Jeep Wrangler is very simple. For this operation, you will need a replacement CR2450 3V battery and a small flathea…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos