Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Third Brake Light on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part:

Let's see how to remove the third brake light on a Jeep Wrangler. The light is located behind the spare wheel. Unscrew the screws located at the back of the light cover after removing the wheel. Once the back of the light is free from any constraints, detach it from the light itself (disconnect the relevant power connectors). Fit the new light: connect the power connector, insert the cover into the back of the light (after fitting the bulbs), and screw in the securing screws. Test the operation of the third light by turning on the ignition.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Centre Brake Light on Jeep Wrangler
Removing the Centre Brake Light on Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) How to remove the third brake light on a Jeep Wrangler? The light is located above the spare wheel of the vehicle. Remove the spare wheel, then unscr…
How to Replace the Battery in My Jeep Wrangler
How to Replace the Battery in My Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In this brief video, you can see the steps to remove and replace the battery located in the engine bay of the third generation Jeep Wrangler. First, …
Replacing the Battery of the Jeep Wrangler MK3
Replacing the Battery of the Jeep Wrangler MK3
Jeep Wrangler (2007-2018 / MK 3, JK) Today, discover the steps to remove and replace the battery located in the engine bay of the third-generation Jeep Wrangler. First, open the bonnet a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos