Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

Here are the simple steps to replace the rear brake pads on a Jeep Wrangler. First, lift the vehicle and remove the wheel.

Now, unscrew the bolts holding the brake caliper in place, one at the top and the other at the bottom. Once done, remove the caliper and replace the old brake pads with new ones.

Before remounting the brake caliper, ensure the piston is retracted into the caliper. You can then remount it by simply following the reverse procedure.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pads on a Jeep Wrangler?
How to Replace the Brake Pads on a Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) The procedure for replacing the brake pads on a Jeep Wrangler is the same for both the front and rear wheels. You will need to lift the vehicle so th…
How to Replace the Rear Brake Pads on a Jeep Wrangler
How to Replace the Rear Brake Pads on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the rear brake pads on a Jeep Wrangler, lift the car so that the corresponding rear wheel is not in contact with the ground. This allows y…
How to Replace the Front Brake Pads on a Jeep Wrangler?
How to Replace the Front Brake Pads on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front brake pads on a Jeep Wrangler, first, loosen the wheel bolts of the corresponding wheel. Once the wheel is removed, you will hav…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos