Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Battery of a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

If you notice difficulty starting the vehicle when turning the key, the battery may no longer be efficient, and it is necessary to replace it. Follow the instructions below. After opening the bonnet, disconnect the negative terminal first, followed by the positive terminal.

Next, unscrew the fixing screw of the lower plate, then remove the battery and replace it with the new one. Finally, reconnect the positive terminal first, then the negative terminal, and refit the lower plate.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

…
Jeep Wrangler (2007-2018 / JK, MK 3) Is the Jeep Wrangler key battery dead and needs changing? Here’s how to remove it from inside the key. Take your remote key, and with the help of a s…
Jeep Wrangler (2018-2026 / JL, MK 4) To replace the battery in the key fob of a Jeep Wrangler, take the fob and locate the small slot along the edge of the casing. Insert a flat screwdri…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos