Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlamp of the Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

To replace the front headlamp of the Jeep Wrangler, open the bonnet to access the rivets securing the upper part of the front grille. By removing these rivets, you can detach the grille from the front of the vehicle and access the screws holding the headlamps.

Loosen these screws and disconnect the connector attached to the headlamp at the back to replace it with a new spare part. The new headlamp should then be connected to the connector, secured with the appropriate screws, and reattached to the front grille.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Jeep Wrangler (1987-1996 / YJ, MK 1) To replace the front headlight on a Jeep Wrangler, first open the bonnet to disconnect the connector at the back of the headlight. Next, unscrew all …
Jeep Wrangler Change engine oil in the Jeep Wrangler. …
Jeep Wrangler (2007-2018 / JK, MK 3) Today, in this brief and simple guide, you will find step-by-step instructions for removing and replacing the front headlights on a Jeep Wrangler. Fi…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos