Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : Headlight

Jeep Wrangler - Headlight

Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the front headlight of the Jeep Wrangler.
The instructions in this guide will show us how to disassemble and replace the front headlight of the Jeep Wrangler. First, we open the car's engine hood and …read all…
Posted on 7 February 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace front headlights on Jeep Wrangler
Today, in this short and simple guide, let's see the step-by-step instructions for disassembling and replacing the front lights of the Jeep Wrangler. First we …read all…
Posted on 26 May 2023 by ScegliAuto
Jeep Wrangler (1987-1996 / MK 1, YJ)
How to replace the headlight on the Jeep Wrangler?
In order to replace the headlight of the Jeep Wrangler you must first open the hood, so that you can disconnect the connector in the rear part of the …read all…
Posted on 30 June 2022 by ScegliAuto
Jeep Wrangler (1997-2007 / TJ, MK 2)
Replacement of the headlights of the Jeep Wrangler
In this video tutorial we will see how to disassemble and replace the headlights of the Jeep Wrangler, following the instructions below. First of all, let's …read all…
Posted on 9 May 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the headlight on the Jeep Wrangler?
In order to replace the headlight of the Jeep Wrangler you have to open the hood in order to have access to the rivets that fix the front grille in its upper …read all…
Posted on 25 March 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the front bulbs of the Jeep Wrangler
In this video we will see how to replace the front bulbs of the Jeep Wrangler third series, American model. We proceed with the disassembly of the front …read all…
Posted on 21 March 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Replacing the headlights on a Jeep Wrangler
Let's start by opening the hood and locating the screws that hold up the central grille, each covered by an easily recognizable plastic cap, and remove them. …read all…
Posted on 6 December 2023 by ScegliAuto
Jeep Wrangler (1997-2007 / TJ, MK 2)
Replacement of headlights and front fog lights
Lift the hood and remove the clips that block the front grille to the car's shock, disconnect the low beam connector, now you can work directly on the …read all…
Posted on 19 September 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Front headlight disassembly instructions
To be able to disassemble the front headlight, it is first necessary to remove the mask: open the front hood, extract the six pressure clips present in the …read all…
Posted on 18 August 2023 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos