Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : Engine oil

Jeep Wrangler - Engine oil

Engine Oil Jeep Wrangler (2007-2018 / jk, mk 3)

Jeep Wrangler (2007-2018 / JK, MK 3)
How to Change the Engine Oil on a Jeep Wrangler JK DIY
To safely change the oil in your Jeep Wrangler, work with the engine warm (not hot), on a flat surface, with the vehicle stabilised and supported on approved …Read all…
Posted on 30 July 2026 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to Replace the Oil and Filter of the Jeep Wrangler
The first step to replace the oil is to get a container that can fit under the vehicle to collect the used oil. Position the container under the drain plug of …Read all…
Posted on 1 August 2026 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Oil Change for Jeep Wrangler [UK]
Open the bonnet and unscrew the oil filler cap, position the vehicle on a ramp and lift it up, locate the oil drain plug and, using an Allen key, loosen the …Read all…
Posted on 3 July 2026 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Oil Change on a 2017 Jeep Wrangler
In this tutorial video, learn how to change the engine oil on a 2017 Jeep Wrangler. Begin by going under the vehicle and removing the oil sump plug to drain …Read all…
Posted on 29 June 2026 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Engine Oil Change in a Jeep Wrangler
If the oil change warning light on your Jeep Wrangler comes on, don't worry, you can change the oil yourself by following our guide. You will need a …Read all…
Posted on 9 April 2026 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to Change the Oil and Filter on a Jeep Wrangler
Want to change the oil and filter on your Jeep Wrangler? No worries. Follow these steps. Lift the bonnet and secure it, then use a socket wrench to unscrew the …Read all…
Posted on 11 March 2026 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Oil Change and Maintenance
Release and lift the bonnet, then locate the oil filler cap, which is on the right side of the engine. Above it, you will find indications on the type of oil …Read all…
Posted on 7 March 2026 by ScegliAuto
Airbag (2) Alternator (2) Speaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Transmission (3) Spark plugs (1) Convertible top (3) Body (5) Glove compartment (1) Key (21) Timing belt (3) V-belt (1) Onboard computer (2) Checks and maintenance (9) Throttle body (1) Dashboard (2) Bearing (2) Brake rotors (2) Headlight (10) Tail light (5) Air filter (8) Cabin air filter (13) Diesel fuel filter (1) Oil filter (4) Parking brake (3) Grille (4) Accessory kit (3) Light bulb (3) Side marker bulb (4) Headlight bulb (4) Tail light bulb (2) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) License plate light (2) (2) Handle (2) Starter motor (3) Transmission fluid (1) Brake fluid (2) Engine oil (7) Power steering fluid (1) Clock (3) Door trim panel (4) Front bumper (3) Rear bumper (2) Brake pads (6) Tires (1) Shift knob (8) Car door (10) Instrument cluster (2) Radiator (1) Heater core (1) Wheel (2) Fuse box (12) Seat (5) Axle shaft (2) Crankshaft position sensor (1) Side mirror (8) Warning light – error code (11) Tire pressure warning light (24) Service warning light (69) Brake drums and shoes (1) Fuel cap (3) Windshield wipers (5) Thermostat (3) Drivetrain (3) EGR valve (1) Blower motor (1) Side window (1) Steering wheel (3)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos