Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil and Filter on a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

Want to change the oil and filter on your Jeep Wrangler? No worries. Follow these steps.

Lift the bonnet and secure it, then use a socket wrench to unscrew the oil filter cap. Raise the vehicle on a column lift and unscrew the oil sump bolt, allowing the fluid to drain into a disposal container. Reinstall the oil sump bolt, fit the new filter, and top up with new oil. Use the dipstick to check the oil level multiple times until you reach the ideal measurement.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Change the Oil and Filter on a Jeep Wrangler
How to Change the Oil and Filter on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this video, see how to change the engine oil and filter on a Jeep Wrangler. In the engine bay, use a socket to unscrew the black filter cap. Lift …
Oil Change on a 2017 Jeep Wrangler
Oil Change on a 2017 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this tutorial video, learn how to change the engine oil on a 2017 Jeep Wrangler. Begin by going under the vehicle and removing the oil sump plug t…
How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos