Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to change the oil and filter of a Jeep Wrangler

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Oil filter
Operation: How to change the oil and filter of a Jeep Wrangler

Let's see in this video how to change the engine oil with its filter on a splendid Jeep Wrangler. In the engine compartment we unscrew the black filter cover cap with a socket wrench. We lift our car on a column bridge or on a jack and we go to unscrew with a socket wrench with a suitable socket the pin placed under the oil pan, so as to drain the oil into a container for future disposal. . After having drained all the oil well, let's screw the pin back into the oil pan. Now we screw the new filter with the filter holder into the engine compartment. We check if the cap has adhered well to the metal base. Finally, top up the oil pan with the new liquid following the manufacturer's recommendations.


Posted on 30 September 2023 by ScegliAuto



How to change the oil and filter on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Do you want to change the oil and filter on your Jeep Wrangler? No fear. Let's see in this video how to proceed. We lift the bonnet and put it in saf
Oil change on a 2017 Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In this video tutorial we are going to see how to change the engine oil on a 2017 Jeep Wrangler. To begin we go under the vehicle and remove the oil
How to replace the oil filter and engine oil in a Jeep Wrangler.
Jeep Wrangler (2007-2018 / MK 3, JK) In this video tutorial we can see how it is possible to replace the oil filter and engine oil in a Jeep Wrangler, following some basic steps: the fir

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos