Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil and Filter of the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

The first step to replace the oil is to get a container that can fit under the vehicle to collect the used oil. Position the container under the drain plug of the oil sump, unscrew the plug, and let the oil drain completely. Next, move to the upper engine compartment, and locate the oil filter (near the timing belt) and unscrew it with a suitable spanner.

After applying some oil to the filter gasket, screw it back into place. Then, screw the drain plug back into the oil sump.

Finally, add approximately 5 litres of SAE 5W-30 oil and check the level with the dipstick. Once finished, check for any leaks from either the drain plug in the oil sump or the filter.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Change the Oil and Filter on a Jeep Wrangler
How to Change the Oil and Filter on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Want to change the oil and filter on your Jeep Wrangler? No worries. Follow these steps. Lift the bonnet and secure it, then use a socket wrench to u…
Oil Change on a 2017 Jeep Wrangler
Oil Change on a 2017 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this tutorial video, learn how to change the engine oil on a 2017 Jeep Wrangler. Begin by going under the vehicle and removing the oil sump plug t…
How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos