Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on a 2017 Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Engine oil

In this tutorial video, learn how to change the engine oil on a 2017 Jeep Wrangler. Begin by going under the vehicle and removing the oil sump plug to drain all the old oil into a container. After allowing it to drain completely, re-tighten the sump plug. Next, open the engine bay and remove the plastic engine cover, from which you can remove the oil filter cartridge as shown in the video and replace it. After changing the filter, open the oil filler cap on the engine and add new oil.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Transmission Oil of a Jeep Wrangler
How to Change the Transmission Oil of a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) In this guide, learn how to change the oil in the transmission of a Jeep Wrangler. Position your vehicle on a column lift and raise it to a comfortab…
How to Reset the Oil Service Light in the Jeep Wrangler?
How to Reset the Oil Service Light in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In the Jeep Wrangler JK, after changing the oil and filter, you need to manually reset the corresponding warning light. First, insert the key and tur…
Resetting the Oil Service Light on a 2018 Jeep Wrangler
Resetting the Oil Service Light on a 2018 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) In this short video, we will describe the steps needed to reset the oil service light on a 2018 Jeep Wrangler completely DIY. The procedure resets an…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos