Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Follow the procedure to reset the service light for the regular maintenance oil change on the Jeep Wrangler. First, get in the vehicle and turn on the ignition; then navigate to the settings on the onboard computer and scroll through the options using the arrow buttons on the steering wheel until you reach the engine oil life monitor, as shown in the video.

At this point, press and hold the OK button for a few seconds to permanently reset the oil change warning!


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
How to Reset the Maintenance Light on a Jeep Wrangler Mk3
How to Reset the Maintenance Light on a Jeep Wrangler Mk3
Jeep Wrangler (2007-2018 / JK, MK 3) In this guide for your Jeep Wrangler Mk3 (2007-2018), we will describe all the steps necessary to correctly complete the manual reset of the maintena…
How to reset the service light on the Jeep Wrangler
How to reset the service light on the Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) These short and simple steps will show us how to reset the regular maintenance warning (service) of the Jeep Wrangler. First of all, we get into the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos