Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years 2018-2026
Part: Service warning light

Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get into the vehicle and turn on the ignition; then navigate to the settings of the onboard computer using the steering wheel controls and go to the service life of the engine oil, as shown in the video. At this point, follow the guided procedure to reset the service light so that it resets completely from the dashboard, thus completing the operation!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) In this new mini guide, you will learn step by step how to manually reset the service light on your Jeep Wrangler. First, get into the car and reach …
How to Reset the Oil Service Light in the Jeep Wrangler?
How to Reset the Oil Service Light in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In the Jeep Wrangler JK, after changing the oil and filter, you need to manually reset the corresponding warning light. First, insert the key and tur…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos