Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Central Dashboard Cover on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Dashboard

In this guide, you will find instructions for removing the central cover or dashboard panel on a second-generation Jeep Wrangler, as well as on most models from the manufacturer. First, gather appropriate plastic levers to avoid damaging the dashboard's interior; then, remove the air vents and the central switch panel, disconnecting the electrical connector. Next, unscrew the upper screws to completely remove the plastic cover. The subsequent steps illustrate how to disassemble other internal components of the vehicle.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Air Conditioning Controls on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Removing the central air conditioning controls on a Jeep Wrangler? Start by removing the air vents below the radio. Disconnect the plastic cover from…
How to replace the radio in the Jeep Wrangler?
How to replace the radio in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) Today, we will see how to replace the radio in the Jeep Wrangler. To perform the radio replacement, we need to remove the upper dashboard cover using…
How to Remove the Radio from a Jeep Wrangler Mk3
How to Remove the Radio from a Jeep Wrangler Mk3
Jeep Wrangler (2007-2018 / MK 3, JK) This guide shows how to remove the radio from a Jeep Wrangler Mk3. The first step is to lift the container located on top of the centre console and u…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos