Removing Air Conditioning Controls on Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Air conditioning

Removing the central air conditioning controls on a Jeep Wrangler? Start by removing the air vents below the radio. Disconnect the plastic cover from above the centre console (vents). Use a lever to detach the plastics above the air conditioning control console. Disconnect all electrical connectors located behind the control console. Connect all the connectors to the new operating console. Secure the console in the centre dashboard, lock the securing plastics, and position the plastic air vent cover below the radio.

Updated on 22 March 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

Air Vents - Maintenance and repair on other vehicles

Dashboard - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

Removing Air Conditioning Controls on Jeep Wrangler

Related tutorials

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

More videos