Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 Port of the Jeep Wrangler 4?

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Dashboard

See other generations:
Video tutorial

To find the OBD2 port inside your Jeep Wrangler Mk4, you do not need to disassemble any components. All you need to do is carefully read the following procedure and put it into practice.

First, park your Jeep Wrangler on a flat surface and turn it off completely for safety reasons. Then, remain inside the cabin and locate the OBD2 port situated in the lower area of the dashboard, specifically on the left side.

After locating it, you can finally connect any compatible diagnostic tool.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Disable the Immobiliser on the Jeep Wrangler
How to Disable the Immobiliser on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this brief guide, we will look at the main instructions for deactivating the immobiliser system on the Jeep Wrangler. First, get into the vehicle …
How to Reset the TPMS Light on a 2021 Jeep Wrangler
How to Reset the TPMS Light on a 2021 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) To reset the TPMS light on a Jeep Wrangler, connect the OBD port to your Android or Apple phone to scan the vehicle and reset the light. Once connect…
How to Reset the Tyre Pressure Warning Light on the Jeep Wrangler
How to Reset the Tyre Pressure Warning Light on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In today's tutorial, you will learn how to reset the tyre pressure warning light on the Jeep Wrangler, as well as on other models from the manufactur…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos