Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a 2021 Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the TPMS light on a Jeep Wrangler, connect the OBD port to your Android or Apple phone to scan the vehicle and reset the light. Once connected, follow the app's instructions to perform the reset.

This operation must be carried out with the ignition on and only after adjusting the tyre pressures or replacing the flat tyre. Otherwise, do not perform the reset as it may cause issues with the onboard computer during the actual reset.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Jeep Wrangler
How to Reset the TPMS Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) When the TPMS light comes on in a Jeep Wrangler, it indicates that you need to check the tyre pressures. Once adjusted, following the instructions on…
How to Reset the Service Light on a 2020 Jeep Wrangler
How to Reset the Service Light on a 2020 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Resetting the service light on the 2020 Jeep Wrangler follows a very simple procedure, similar to the reset of the service light on the Jeep Cherokee…
How to Reset the Oil Warning Light on a 2019 Jeep Wrangler
How to Reset the Oil Warning Light on a 2019 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) The service light on the 2019 Jeep Wrangler must be reset only after having the service carried out at a workshop. The service includes the replaceme…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos