Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

When the TPMS light comes on in a Jeep Wrangler, it indicates that you need to check the tyre pressures. Once adjusted, following the instructions on the stickers located on the doors from the manufacturer, you can proceed to reset the light.

To reset the TPMS light, connect the OBD port to a diagnostic computer. If you do not have a computer or tester, you can purchase an OBD Bluetooth adapter online that connects via an app to your Android phone and allows you to scan the vehicle.

Once connected, follow the app's instructions to reset the light, and this operation must be performed with the ignition on.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a 2021 Jeep Wrangler
How to Reset the TPMS Light on a 2021 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) To reset the TPMS light on a Jeep Wrangler, connect the OBD port to your Android or Apple phone to scan the vehicle and reset the light. Once connect…
How to Reset the Service Light on a 2020 Jeep Wrangler
How to Reset the Service Light on a 2020 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Resetting the service light on the 2020 Jeep Wrangler follows a very simple procedure, similar to the reset of the service light on the Jeep Cherokee…
How to Reset the Tyre Pressure Light on the Jeep Wrangler
How to Reset the Tyre Pressure Light on the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Here’s how to reset the tyre pressure light on the Jeep Wrangler. Before performing the reset, ensure all four tyres are at the correct operating pre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos