Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

The procedure for resetting the Service light that appears on the instrument panel of the Jeep Wrangler can be done by inserting the ignition key into the ignition switch and turning it to turn on the instrument panel: once the instrument panel is turned on, you can press the accelerator pedal all the way down three times.

This way, you will notice that the Service light will disappear completely from the car's instrument panel: you can now turn it off by removing the key. When you turn it back on, you will notice that the Service light has disappeared completely.


Posted on 26 April 2025 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Jeep Wrangler
How to Reset the "Service" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…
How to Reset the Service Light on a 2020 Jeep Wrangler
How to Reset the Service Light on a 2020 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Resetting the service light on the 2020 Jeep Wrangler follows a very simple procedure, similar to the reset of the service light on the Jeep Cherokee…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos