Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Service" Light on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wait for the beep to stop. Once the intermittent beep has turned off, press the accelerator pedal all the way down three times, then turn off the instrument cluster. At this point, start the vehicle, and the "Service" light will automatically turn off, successfully completing the reset of the "Service" light on your Jeep Wrangler.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
Jeep Wrangler (2007-2018 / MK 3, JK) Today, you will see the essential instructions to reset the service light for routine maintenance on a Jeep Wrangler. First, get into the vehicle: in…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos