Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the instrument panel of the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Instrument cluster

Today we will discover the instructions that will allow us to disassemble and replace the instrument panel of the Jeep Wrangler dashboard. First of all, we get into the car and start by disassembling and removing the switch panel located in the central part of the dashboard, by leveraging the sides and disconnecting the electrical connector; then we release the top part of the dashboard in order to disassemble the instrument panel, also disconnecting the wiring, as shown in the video. At this point, we install the new instrument panel or repair the old one if necessary, and finally reassemble everything!

Posted on 4 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the Start&Stop feature of the Jeep Wrangler?
How do you deactivate the Start&Stop feature of the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To deactivate the Start&Stop system of the Jeep Wrangler, you need to start the engine by turning the key in the corresponding slot: once the dashboa…
How do you reset the Service light on the Jeep Wrangler?
How do you reset the Service light on the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To completely make the Service light disappear from the instrument panel of the Jeep Wrangler, you will need to turn on the instrument panel by inser…
How to reset the service light on the Jeep Wrangler?
How to reset the service light on the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial, we can see how to reset the service in the Jeep Wrangler, an extremely simple and quick operation, to be carried out only after com…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos