Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headrests from a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Seat

See other generations:
Video tutorial

To remove the front headrests from the Jeep Wrangler, use an object to push in the button located at the base of the right headrest support. While holding it down, completely pull out the headrest from the seat.

The procedure is the same for the front seats. For the rear seats, use a similar procedure: both headrest supports have a bar that must be pulled towards yourself.

By pulling it and lifting the headrest, it can be removed from the respective supports.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Fit Seat Covers on a Jeep Wrangler
How to Fit Seat Covers on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) How to fit the seat cover on the Jeep Wrangler? Let's see how to install the protective seat cover. Move the seat forward and raise the seat base, th…
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
How to Reset the "Tyre Pressure" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you begin, sit in the driver's seat of your Jeep Wrangler. Start by adjusting the tyre pressures according to the recommended values indicated…
How to Reset the "Service" Light on a Jeep Wrangler
How to Reset the "Service" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos