Do it yourself
Frequently asked questions about cars and motorcycles

Jeep Wrangler - Seat

Jeep Wrangler (2007-2018 / JK, MK 3)
How do you remove the headrests of the Jeep Wrangler?

To remove the front headrests of the Jeep Wrangler, use an object to push in the small button located at the base of the right headrest support. While holding …read all…
Posted on 25 February 2024 by ScegliAuto
Jeep Wrangler (1997-2007 / TJ, MK 2)
How to disassemble the Jeep Wrangler TJ seat

How to remove the front seat of the car? Do we want to disassemble and repair the seat or replace it? Let's see the disassembly of the seat on the Wrangler. …read all…
Posted on 21 January 2024 by ScegliAuto
Jeep Wrangler (1997-2007 / TJ, MK 2)
How to remove the seats on a Jeep Wragler

If you don't know how to remove the seats of your Jeep Wrangler, watch this video tutorial and you will solve the problem. First of all, you will have to …read all…
Posted on 13 January 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Remove the front seats of the Jeep Wrangler

Do we want to replace the front seats of our Jeep? Let's remove the seats and put on new ones. We open the car door, move the seat back (with the electric …read all…
Posted on 21 December 2023 by ScegliAuto
Jeep Wrangler (1997-2007 / TJ, MK 2)
Seat replacement on Jeep Wrangler

Replacing the front seat of a Jeep Wrangler? We lift the front seat of the Wrangler to access under it and disassemble it. We move the seat forward, then, with …read all…
Posted on 17 December 2023 by ScegliAuto

Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos