Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : Antifreeze coolant

Jeep Wrangler - Antifreeze coolant

Antifreeze Coolant Jeep Wrangler (2007-2018 / mk 3, jk)

Jeep Wrangler (2007-2018 / MK 3, JK)
How to Replace the Antifreeze in the Jeep Wrangler
This guide shows how to bleed and replace the coolant in the Jeep Wrangler by following these simple steps. First, remove the lower engine cover to access the …Read all…
Posted on 27 June 2026 by ScegliAuto
Jeep Wrangler (2007-2018 / MK 3, JK)
How to Maintain the Coolant in Your Jeep Wrangler
To maintain your Wrangler, start by checking the coolant level in the engine cooling system. Remove the rubber hooks at the sides of the bonnet. Lift the front …Read all…
Posted on 9 March 2026 by ScegliAuto
Airbag (2) Alternator (2) Speaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Transmission (3) Spark plugs (1) Convertible top (3) Body (5) Glove compartment (1) Key (20) Timing belt (3) V-belt (1) Onboard computer (2) Checks and maintenance (9) Throttle body (1) Dashboard (2) Bearing (2) Brake rotors (2) Headlight (10) Tail light (5) Air filter (8) Cabin air filter (13) Diesel fuel filter (1) Oil filter (4) Parking brake (3) Grille (4) Accessory kit (3) Light bulb (3) Side marker bulb (4) Headlight bulb (4) Tail light bulb (2) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) License plate light (2) (2) Handle (1) Starter motor (3) Transmission fluid (1) Brake fluid (2) Engine oil (7) Power steering fluid (1) Clock (3) Door trim panel (4) Front bumper (3) Rear bumper (2) Brake pads (6) Tires (1) Shift knob (8) Car door (10) Instrument cluster (2) Radiator (1) Heater core (1) Wheel (2) Fuse box (12) Seat (5) Axle shaft (2) Crankshaft position sensor (1) Side mirror (8) Warning light – error code (11) (12) Tire pressure warning light (12) Service warning light (68) Brake drums and shoes (1) Fuel cap (3) Windshield wipers (5) Thermostat (3) Drivetrain (3) EGR valve (1) Blower motor (1) Side window (1) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos