Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : License plate light

Jeep Wrangler - License plate light

License Plate Light Jeep Wrangler (2007-2018 / mk 3, jk)

Jeep Wrangler (2007-2018 / MK 3, JK)
Number Plate Light Replacement
A simple and quick job that will certainly help avoid unpleasant issues with the authorities. After removing the number plate, the number plate holder is …Read all…
Posted on 6 March 2026 by ScegliAuto
Jeep Wrangler (2007-2018 / MK 3, JK)
Instructions for Replacing Number Plate Lights
Replacing the number plate light is very simple as the bulb holder is fixed to the support with plastic tabs. Once you detach the bulb holder, rotate the bulb …Read all…
Posted on 26 February 2026 by ScegliAuto
Airbag (2) Alternator (2) Speaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Transmission (3) Spark plugs (1) Convertible top (3) Body (5) Glove compartment (1) Key (20) Timing belt (3) V-belt (1) Onboard computer (2) Checks and maintenance (9) Throttle body (1) Dashboard (2) Bearing (2) Brake rotors (2) Headlight (10) Tail light (5) Air filter (8) Cabin air filter (13) Diesel fuel filter (1) Oil filter (4) Parking brake (3) Grille (4) Accessory kit (3) Light bulb (3) Side marker bulb (4) Headlight bulb (4) Tail light bulb (2) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) License plate light (2) (2) Handle (1) Starter motor (3) Transmission fluid (1) Brake fluid (2) Engine oil (7) Power steering fluid (1) Clock (3) Door trim panel (4) Front bumper (3) Rear bumper (2) Brake pads (6) Tires (1) Shift knob (8) Car door (10) Instrument cluster (2) Radiator (1) Heater core (1) Wheel (2) Fuse box (12) Seat (5) Axle shaft (2) Crankshaft position sensor (1) Side mirror (8) Warning light – error code (11) (12) Tire pressure warning light (12) Service warning light (68) Brake drums and shoes (1) Fuel cap (3) Windshield wipers (5) Thermostat (3) Drivetrain (3) EGR valve (1) Blower motor (1) Side window (1) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos