Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Number Plate Light Replacement

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: License plate light

A simple and quick job that will certainly help avoid unpleasant issues with the authorities. After removing the number plate, the number plate holder is secured with four bolts. Unscrew them to lift it and access the cables behind it. Disconnect the connector attached to the back of the number plate holder and replace it with the new one. Reconnect the connector to the number plate holder and reposition it to secure it with its bolts. Perform tests to ensure everything is in order and that the light turns on properly.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Wiper Blade Replacement
Rear Wiper Blade Replacement
Jeep Wrangler (2007-2018 / MK 3, JK) This is a simple and quick task that can save you time and money without needing to take your vehicle to the garage for replacement. You just need to…
Front Indicator Bulb Replacement
Front Indicator Bulb Replacement
Jeep Wrangler (2007-2018 / MK 3, JK) Replacing the front indicator bulb, located just below the headlamp, is very simple as there is enough space to reach the back of the indicator. Disc…
Replacing the Rear Brake Pads on a Jeep Wrangler
Replacing the Rear Brake Pads on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Here are the simple steps to replace the rear brake pads on a Jeep Wrangler. First, lift the vehicle and remove the wheel. Now, unscrew the bolts hol…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos