Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Light Bulb on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Interior dome light bulb

Below are the instructions for removing and replacing the interior light bulb on a Jeep Wrangler. First, get inside the vehicle and start by removing the interior light cover by prying it off from the sides. Then, remove the small bulb and replace it with a new one (with the same fitting), as shown in the video. At this point, check the operation of the interior light, and finally, refit the cover. Similarly, replace the rear interior light if necessary.

Posted on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Centre Brake Light on Jeep Wrangler
Removing the Centre Brake Light on Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) How to remove the third brake light on a Jeep Wrangler? The light is located above the spare wheel of the vehicle. Remove the spare wheel, then unscr…
How to Replace the Front Indicator Bulb on a Jeep Wrangler?
How to Replace the Front Indicator Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front indicator bulb on a Jeep Wrangler, access the inner part of the front bumper to disconnect the connector for the side light. Onc…
How to Replace the Rear Lights on a Jeep Wrangler?
How to Replace the Rear Lights on a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial, you will see how to remove and then replace the rear lights on a Jeep Wrangler, a very simple operation. First, ensure the key is n…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos