Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Indicator Bulb on a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side marker bulb

See other generations:
Video tutorial

To replace the front indicator bulb on a Jeep Wrangler, access the inner part of the front bumper to disconnect the connector for the side light. Once the connector is disconnected, remove the old bulb from the connector to fit a new one. The new bulb can then be inserted into its housing in the side light; after the new bulb is correctly installed, check that it functions properly.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
…
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front headlamp bulb of a Jeep Wrangler, first open the bonnet to access the bolts at the top of the front grille. Once released, you c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos