Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : Side turn signal light bulb

Jeep Wrangler - Side turn signal light bulb

Jeep Wrangler (2018-2024 / MK 4, JL)
How to disassemble and install the turn signal bulbs of the Jeep Wrangler mirror
In this guide, we will see the steps that will allow us to disassemble and install the bulbs of the side turn signals of the exterior rearview mirror of the …read all…
Posted on 7 November 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the turn signal bulb on a Jeep Wrangler.
If we want to replace the front turn signal bulb on this car model, in the following description we will find the correct indications and methods to use for …read all…
Posted on 20 May 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the front indicator light bulb on the Jeep Wrangler?
In order to replace the front indicator light bulb on the Jeep Wrangler you need to access the inside of the front bumper, so that you can disconnect the …read all…
Posted on 12 October 2022 by ScegliAuto
Jeep Wrangler (2018-2024 / MK 4, JL)
Replacement indicator light bulb on Jeep Wrangler
With a wedge or a flat head screwdriver, remove the clips in the wheel arch, obviously from the side of the light concerned. Remove the wheel arch frame and …read all…
Posted on 6 January 2024 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos