Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jeep
  4. :
  5. Wrangler
  6. : Brake oil

Jeep Wrangler - Brake oil

Jeep Wrangler (2007-2018 / JK, MK 3)
Brake fluid replacement and maintenance

A simple process that will allow you to save time and money, without having to take your car to a mechanic and keep it still for days, you just need a good …read all…
Posted on 22 September 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Brake pad oil replacement

Raise the hood and unscrew all the bolts holding the reservoir in front of the brake booster, remove the reservoir and you will now have more convenient access …read all…
Posted on 19 September 2023 by ScegliAuto

Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos