Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Fluid Replacement and Maintenance

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake fluid

See other generations:
Video tutorial

A simple task that will save you time and money, without having to take your vehicle to a mechanic and leave it stationary for days. All you need is a good will and to follow this simple and brief guide.

Open and lift the bonnet, then locate the brake fluid reservoir. It is situated on the right side of the engine, a small white tank with a yellow cap. It indicates the fluid to use, so purchase the recommended fluid from the manufacturer and retrace your steps for reassembly.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacement and Maintenance of Transmission Lubricant
Replacement and Maintenance of Transmission Lubricant
Jeep Wrangler (2007-2018 / JK, MK 3) First, lift your vehicle, preferably on a ramp; otherwise, suitable axle stands will suffice. Next, locate the transmission to unscrew the cap indica…
How to Replace the Handbrake Shoes on a Jeep Wrangler
How to Replace the Handbrake Shoes on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this video, see how to disassemble a brake disc with all its components on a Jeep Wrangler. Position your car on a column lift, loosen the bolts w…
Removing the Brake Disc with the Caliper
Removing the Brake Disc with the Caliper
Jeep Wrangler (2007-2018 / JK, MK 3) In this video, we will see how to remove a brake disc. Secure the car and unscrew all the wheel bolts, remove the wheel and begin unscrewing the cali…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos