Do it yourself
Frequently asked questions about cars and motorcycles

Replacement and Maintenance of Transmission Lubricant

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Drivetrain

First, lift your vehicle, preferably on a ramp; otherwise, suitable axle stands will suffice. Next, locate the transmission to unscrew the cap indicated in the video. Insert your finger to check the lubrication fluid level inside the transmission. If you need to replace the fluid, the cap to unscrew is located lower down, so unscrew it, collect the excess fluid, and reinstate it through the level check cap. Retrace your steps for reassembly.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) In this guide, learn how to change the oil in the transmission of a Jeep Wrangler. Position your vehicle on a column lift and raise it to a comfortab…
Jeep Wrangler (2018-2026 / JL, MK 4) In this video tutorial, you will learn how to remove and replace the transmission oil on a Jeep Wrangler by following the instructions below. First, …
Jeep Wrangler (2007-2018 / MK 3, JK) A simple and quick operation that allows you to save time and money by avoiding leaving your vehicle at a garage for this work. Just follow this brie…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos