Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Transmission Oil on a Jeep Wrangler

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Transmission fluid

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the transmission oil on a Jeep Wrangler by following the instructions below. First, lift the vehicle and start by unscrewing the oil drain bolt located at the rear; allow it to drain into a container for about ten minutes.

At this point, clean the drain bolt of any metal debris and unscrew the fill bolt to pour in the new transmission oil, the correct type for your transmission; once topped up, tighten the cap and start the engine!


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Change the Transmission Oil of a Jeep Wrangler
How to Change the Transmission Oil of a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) In this guide, learn how to change the oil in the transmission of a Jeep Wrangler. Position your vehicle on a column lift and raise it to a comfortab…
Resetting the Oil Change Light on Jeep Wrangler JK
Resetting the Oil Change Light on Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) Before starting the reset procedure for the oil change light on the Jeep Wrangler JK, ensure, as you should for any maintenance operation on any vehi…
Engine Oil Change in a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) If the oil change warning light on your Jeep Wrangler comes on, don't worry, you can change the oil yourself by following our guide. You will need a …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos