Engine Oil Change in a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:

2007-2018 (JK, MK 3)

This video is currently unavailable

If the oil change warning light on your Jeep Wrangler comes on, don't worry, you can change the oil yourself by following our guide. You will need a wide-mouthed container to collect the used oil, and position it under the engine.

Unscrew the oil sump plug and be careful as it will spurt out quickly once removed. After this, you may consider fitting a valve to simplify this action next time, as shown in the video.

Refit the lower plug and you can renew the oil from the engine bay; using a funnel, pour it to the correct level and check with the dipstick to ensure there is enough but not too much. The video shows a 2014 model.

Updated on 17 March 2026 by ScegliAuto

Other guides you may be interested in

Engine - Maintenance and repair on other vehicles

Engine Oil - Maintenance and repair on other vehicles

Valve - Maintenance and repair on other vehicles

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!

by ScegliAuto

Engine Oil Change in a Jeep Wrangler

Related tutorials

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

More videos