Do it yourself
Frequently asked questions about cars and motorcycles

How to Unlock the Automatic Gearbox in a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Transmission

See other generations:
Video tutorial

In this tutorial, you will learn how to unlock the automatic gearbox in a Jeep Wrangler, a very simple operation to perform in case of emergency, for example, to move the vehicle following a breakdown. First, enter the cabin and insert the key, turning it to the second position.

Next, locate the small cap on the right side of the centre console, remove it, and insert a flat-head screwdriver into the slot. At this point, press the internal mechanism and move the gear lever to the desired position.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

Jeep Wrangler (2007-2018 / JK, MK 3) Do you want to replace the gear knob on your Wrangler? Let's see how to do it in this video. Use a lever to detach the plastic piece at the bottom (l…
…
Jeep Wrangler Change engine oil in the Jeep Wrangler. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos