Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Jeep
  4. :
  5. Wrangler
  6. : Gearbox

Jeep Wrangler - Gearbox

Jeep Wrangler (2007-2018 / JK, MK 3)
How to unlock the automatic transmission in the Jeep Wrangler?

In this tutorial, we can see how to unlock the automatic transmission in the Jeep Wrangler, a very simple operation to perform in case of emergency, for …read all…
Posted on 5 February 2024 by ScegliAuto
Jeep Wrangler (1987-1996 / MK 1, YJ)
How do you remove the Jeep Wrangler gearbox?

To be able to remove the gearbox from the Jeep Wrangler, you need to access the lower part of the engine compartment, so that you have access to the fixing …read all…
Posted on 13 December 2022 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How do I remove the gear knob from the Jeep Wrangler?

In order to remove the gear knob from the Jeep Wrangler you need to use a flat-blade screwdriver. With this, you will need to peel off the chrome coating which …read all…
Posted on 27 February 2024 by ScegliAuto

Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos