Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : Air filter

Jeep Wrangler - Air filter

Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the air filter on the Jeep Wrangler 3
The engine air filter inside your third series Jeep Wrangler (year 2008-2018) must be replaced periodically in order to avoid any abnormal overheating. Below …read all…
Posted on 11 April 2023 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to change the air filter on the Jeep Wrangler
Do we want to independently replace the air filter on this car model? In the text that is reported below we can identify all the operations necessary to …read all…
Posted on 10 August 2022 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How do you replace the cabin filter on the Jeep Wrangler?
In order to replace the passenger compartment filter of the Jeep Wrangler, you need to open the glove box located on the passenger side, removing the side …read all…
Posted on 14 July 2022 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the air filter on the Jeep Wrangler 3.6L V6
Let's see in this guide the steps that will allow us to remove and replace the air filter of the Jeep Wrangler engine, with 3.6 V6 engine. First we open the …read all…
Posted on 13 April 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the air filter on the Jeep Wrangler
Let's see in this short and simple guide how to remove and replace the Jeep Wrangler engine air filter. First of all, we open the bonnet of our car and start …read all…
Posted on 6 April 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the air filter in the Jeep Wrangler?
In this video we can see how to replace the air filter in the Jeep Wrangler, a very simple and fast operation. After getting the right replacement filter, …read all…
Posted on 5 April 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
How to replace the air filter on a Jeep Wrangler JK
In this video tutorial we are going to see how to replace the air filter on a Jeep Wrangler JK produced from 2007 to 2018. Doing this is really very simple, it …read all…
Posted on 28 March 2024 by ScegliAuto
Jeep Wrangler (2007-2018 / JK, MK 3)
Engine air filter replacement
The engine air filter container (AIRBOX) is located in the front left part of the engine compartment: to be able to lift the cover, after having released the …read all…
Posted on 31 July 2023 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (3) Air conditioning (1) Car stereo (8) Battery (11) Grille (1) Gearbox (3) Spark plugs (1) Soft top (1) Bodywork (2) Glove box (1) Key (17) Timing belt (3) V-belt (1) -board computer (11) Checks and maintenance (26) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Headlight (9) Tail light (4) Air filter (8) Cabin air filter (8) Diesel filter (1) Oil filter (4) Hand brake (1) Grille (3) Accessory Kit (3) Light bulb (3) Side turn signal light bulb (4) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (1) License plate light (2) Third brake light (2) Handle (1) Engine (1) Starter motor (3) Gear oil (1) Brake oil (2) Engine oil (9) Power steering oil (1) Door panel (3) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (2) Gear Shift Knob (6) Door (8) Instrument cluster (12) Radiator (1) Passenger compartment heating radiator (1) Wheel (3) Fuse box (9) Seat (5) Drive shaft (2) Crankshaft RPM sensor (1) Outside rearview mirror (6) Drums and shoes (1) Windscreen wipers (5) Thermostat (3) Transmission (3) EGR valve (1) Interior blower (1) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos