Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Air Filter Replacement

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

The engine air filter housing (AIRBOX) is located at the front left of the engine compartment: to lift the cover, after unclipping the securing tabs, you need to unscrew the locking screws of the intake duct, which is rigid and would not allow the cover to be lifted.

At this point, extract the old filter, ensure there are no dirt residues inside the filter housing, and insert the new one, making sure the edges that act as a seal fit properly.

Then reattach the cover with the respective tabs and secure the intake duct again.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Jeep Wrangler 3
How to Replace the Air Filter of the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / JK, MK 3) The engine air filter in your Jeep Wrangler third series (2008-2018) should be replaced periodically to avoid any abnormal overheating. First, switch…
How to Change the Air Filter on a Jeep Wrangler
How to Change the Air Filter on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Do you want to independently replace the air filter on this model of car? The text provided below outlines all the necessary operations to correctly …
How to Replace the Air Filter of the Jeep Wrangler
How to Replace the Air Filter of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Follow this brief and simple guide to remove and replace the engine air filter of the Jeep Wrangler. First, open the bonnet of your car and disconnec…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos