Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

Do you want to independently replace the air filter on this model of car? The text provided below outlines all the necessary operations to correctly carry out the replacement. The air filter is located in the engine bay on the right side behind the headlight.

To remove the filter housing cover, you must unclip the steel clips securing it on the sides. Then, lift the cover and take out the filter from inside, replacing it with the new one. Proceed to correctly position the cover back over the compartment and refit the steel clips.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to Replace the Air Filter of the Jeep Wrangler 3
How to Replace the Air Filter of the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / JK, MK 3) The engine air filter in your Jeep Wrangler third series (2008-2018) should be replaced periodically to avoid any abnormal overheating. First, switch…
How to Replace the Air Filter of the Jeep Wrangler
How to Replace the Air Filter of the Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Follow this brief and simple guide to remove and replace the engine air filter of the Jeep Wrangler. First, open the bonnet of your car and disconnec…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos