Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Is the adjustment of a car's headlights done using two screws?

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight

See other generations:
Video tutorial

The work shown in this video involves a common procedure for most cars on the road, namely the adjustment of the front headlights using adjustment screws. In the specific case of the Jeep Wrangler, this is located at the front, at the bottom; other vehicles have this screw at the back, but the principle is the same.

Position the vehicle in front of a preferably white wall, mark a reference point, switch on the vehicle's lights, and adjust the aforementioned screw by tightening or loosening it, thereby raising or lowering the headlight alignment.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs in the Jeep Wrangler?
How to Replace the Headlight Bulbs in the Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) In this video, you can see how to replace the headlight bulbs in the Jeep Wrangler. For this simple and quick operation, you will need a cross-head s…
How to Remove the Grille of a Jeep Wrangler JK
How to Remove the Grille of a Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) Removing the grille of a Jeep Wrangler, model JK, is very simple. Simply open the front bonnet and remove the fixing screws using a flathead screwdri…
Installation of LED Projector Headlights
Installation of LED Projector Headlights
Jeep Wrangler (2007-2018 / JK, MK 3) Installing LED projector headlights will give the front of the vehicle a very modern and appealing look while ensuring greater brightness; to install…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos