Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight of the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the front headlight of the Jeep Wrangler. First, open the bonnet of the vehicle and start disassembling the front bumper grille by unscrewing all the fixing screws; then unscrew the screws of the headlight unit, disconnecting the electrical connector of the bulbs to remove it, as shown in the video.

At this point, replace the bulbs or the entire front headlight if necessary, then install the new one; apply the reverse procedure for reassembling the headlight unit!


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Jeep Wrangler?
How to Replace the Front Headlight on a Jeep Wrangler?
Jeep Wrangler (1987-1996 / YJ, MK 1) To replace the front headlight on a Jeep Wrangler, first open the bonnet to disconnect the connector at the back of the headlight. Next, unscrew all …
…
How to Replace the Headlight Bulbs in the Jeep Wrangler?
How to Replace the Headlight Bulbs in the Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) In this video, you can see how to replace the headlight bulbs in the Jeep Wrangler. For this simple and quick operation, you will need a cross-head s…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos