Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Jeep Wrangler?

Model: Jeep Wrangler MK 1, YJ - Years 1987-1996
Part: Headlight

To replace the front headlight on a Jeep Wrangler, first open the bonnet to disconnect the connector at the back of the headlight. Next, unscrew all the screws around the headlight to detach the plastic cover that surrounds it. By doing this, you will be able to unscrew the other bolts that secure the headlight and were previously covered: removing the bolts will allow you to pull the headlight out of its housing and replace it with a new part that must be properly installed.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
How to Replace the Front Headlamp of the Jeep Wrangler?
How to Replace the Front Headlamp of the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front headlamp of the Jeep Wrangler, open the bonnet to access the rivets securing the upper part of the front grille. By removing the…
…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos