Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to replace the rear light in the Jeep Wrangler?

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Tail light
Operation: How to replace the rear light in the Jeep Wrangler?

In this tutorial we can see how to disassemble and replace the rear light in the Jeep Wrangler JK, a very simple and fast operation. To do this we will only need a cross-tip screwdriver, as well as a replacement headlight of course. We start by making sure that the key is not inserted, then we continue by unscrewing the two fixing screws placed along the inner edge. Next, we grab the headlight, pull it towards us and extract it from the bodywork. Finally, disconnect the large connector on the back and mount the spare part following exactly the reverse procedure.


Posted on 11 October 2022 by ScegliAuto



How do you remove the rear taillight of the Jeep Wrangler?
Jeep Wrangler (2018-2024 / JL, MK 4) In order to remove the rear light of the Jeep Wrangler, you need to open the rear door to access the side of the trunk where the light is located. He
Replace the rear light bulbs on the Jeep Wrangler
Jeep Wrangler (2018-2024 / JL, MK 4) Today we will see, in this video tutorial, how to remove and replace the rear light bulbs of the Jeep Wrangler, in simple and quick steps. First of a
Replacing the rear light on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Removing and replacing a rear light on Jeep Wrangler is really easy and now we are showing it to you. To do this, in fact, it is sufficient to unscre

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos